Supporting Skype and SIP, H.323, MGCP
1 USB interface to PC, 1 FXS for regular phone, 1 FXO for   PSTIN call relays
Supporting DECT, 2.4G, 900M and any other wireless phones
Make/Receive both VoIP calls and regular PSTN calls
Auto-detection and auto-switch to VoIP or PSTN calls
Phone rings for all incoming VoIP and PSTN calls
VoIP or PSTN calls selected by phone key (*)
Dial using the phone keypads
USB and PSTN line LED indicator
Driver and sound card built-in, no external power required
PC-to-PC, PC-to-phone, Phone to Phone operation
 
 

  How to use with Skype
Run Skype first
       Download Skype software and install it
       Run Skype and log in with skype account.
            Icon is means Skype connect successfully;
            Icon is please check PC connect to Internet successfully..
Connect USB-B1K to PC
       Plug USB-P1K to your PC usb port , the "POWER" will be on.
       Plug PSTN line to "LINE" port, the "LINE" will be on.
       Plug Phone to "TEL1"(or "TEL2") port.
Run SkypeMate
       Download SkypeMate software and install it
       Run SkypeMate
            After runing SkypeMate, there is a icon:
           Device and Skype are connected successfully;
           Please run Skype first;
           The P1K connected incorrectly, please reconnect.
Make calls
       Add "SkypeMate" to Contacts
       Assign Speed-Dial for it, for example "11"
                  
       Input number and call out:
            Press "*" for changing to USB channel,the"USB" indicator is on. Dial "11" on phone,this number will be shown in the Skype window.And then press "#" , Skype will call out .If the number is invalid, Skype will popup a box. Press any key ,the box will be cleared . Then check number and input again.
For SkypeOut
      Press "*"+"00"+"country number"+"phone number"+"#" can start the Skypeout.
Adjust options (volume and ringer)
       Double click the on the taskbar, then you can adjust the volume and ringer

  Install figure